Medidas de piezas dentarias para el posicionamiento correcto de brackets en una población latina (Argentina) / Measures for positioning teeth correct brackets in a Latin population (Argentina)

Introducción: El posicionamiento preciso de los brackets de ortodoncia en las diferentes situaciones clínicas es esencial. Para ello, se utiliza la tabla de McLaughlin-Bennett, realizada sobre una población anglosajona. Dada la gran variabilidad que puede existir en los diferentes grupos poblacionales, para estandarizar las medidas en la colocación de los brackets, sería necesario emprender un análisis de la población local y determinar cuáles serán las alturas de las coronas clínicas de todas las piezas dentarias para nuestra población. Materiales y método: Se estudiaron 200 modelos de estudio de individuos argentinos, caucásicos, de ambos sexos, con dentición permanente completa hasta el segundo molar inclusive, entre 13 y 25 años, que no recibieron tratamiento ortodóncico previo. Resultados: Las diferencias estadísticas existentes, con respecto a lo propuesto por McLaughlin y Bennett, en el maxilar superior fueron: altamente significativas (p = 0,0001) en el incisivo central, incisivo lateral y segundo molar; significativas en el canino (p = 0,0128) y en el primer molar (p = 0,018) y no significativas en el primer premolar (p = 0,239) y segundo premolar (p = 0,1741). En el maxilar inferior: altamente significativas (p = 0,0001) en el segundo molar y no significativas en el resto de las piezas dentarias. Conclusión: Los valores que se obtuvieron con el estudio, dada la variabilidad regional de la muestra, no coinciden con los valores que arroja la tabla de McLaughlin-Bennett, de origen anglosajón. Se sugiere la creación de una tabla acorde con las medidas de los pacientes locales(AU)

Accurate positioning of dental braces in different clinical situations is essential. To that end, it is used the chart developed by McLaughlin and Bennett, which was made in the Anglo-Saxon population. Due to the considerable variability among different population groups, an analysis of the local population would be necessary to be carried out in order to standardize the measurements for the positioning of braces and to determine the clinical crown height of teeth in our population. Two hundred Caucasian, Argentine male and female study models, aged between 13 and 25 with full permanent dentition, fully erupted second molars with no previous orthodontic treatment were studied. Existing statistical differences with regard to the guidelines proposed by McLaughlin and Bennett in the maxilla were: highly significant (p = 0.0001) for second molars, central and lateral incisors; significant for canines (p = 0.0128) and first molars (p = 0.018); and non-significant for first premolars (p = 0.239) and second premolars (p = 0.1741). In the mandible the differences were: highly significant (p = 0.0001) for second molars and non-significant for the other teeth. The values that were obtained in the study, given the regional variability of the sample, do not correspond to the values that are shown in the chart by McLaughlin and Bennett, of Anglo Saxon origin. It is suggested the creation of a new chart in line with the measurements of local patients(AU)

Esthetic proportions of maxillary anterior teeth of 120 Chinese adults / 北京大学学报(医学版)

OBJECTIVE@#To analyze the esthetic proportions of maxillary anterior teeth in term of the apparent widths proportion of the adjacent teeth and width/height ratio of the clinical crown in 120 Chinese adults.@*METHODS@#Maxillary gypsum casts were obtained from the dental laboratories of stomatological hospitals in North China, Southeast China, and Southwest China, according to the inclusion criteria and exclusion criteria. Standardized digital photographs of each cast were recorded. The apparent widths and actual widths and heights of the central incisors, lateral incisors and canines were determined by ImageJ software for the calculation of apparent widths proportion of the adjacent teeth and width/height ratio of the clinical crown. The ideal apparent widths proportion (Golden proportion and Preston proportion) and width/height ratio (0.80) were tested. The gender, arch side, and regional differences were investigated.@*RESULTS@#The apparent widths proportion of the lateral/central incisor was 0.724±0.047, of the canine/lateral incisor was 0.814±0.092. The width/height ratio of the central incisor was 0.848±0.072, of the lateral incisor was 0.834±0.094, of the canine was 0.883±0.098. The esthetic proportions were different from the predicted ideal ratio (P < 0.001). The apparent widths proportion of lateral/central incisor was significantly larger in the right side than that in the left side (0.730± 0.044 vs. 0.718±0.050), and was significantly smaller in North China than that in Southwest China (0.711±0.051 vs. 0.731±0.044). The width/height ratio of the central incisor was significantly larger in the female than that in the male (0.855±0.074 vs. 0.835±0.068), and in the right side than that in the left side (0.855±0.073 vs. 0.842±0.072). The width/height ratio of the lateral incisor was significantly larger in the female than that in the male (0.843±0.097 vs. 0.817±0.084).@*CONCLUSION@#The apparent widths proportion of adjacent teeth and the width/height ratio of the clinical crown in Chinese adults are different from the foreigner's. The esthetic proportion parameters have significant population specificity, and the measurements cannot be generalized as well as it should be applied with caution.

Sex Identification Based on Tooth Crown Trait Analysis Among the Mongoloid Race

Abstract Objective: To determine whether anterior and posterior tooth crown traits exhibit sexual dimorphism and identify traits characteristic to the Mongoloid race, especially among the Indonesian population. Material and Methods: This study cross-sectional study analyzed 108 dental casts from 36 males and 72 females. The traits analyzed included winging, shoveling, double shoveling, canine mesial ridge, canine distal accessory ridge, hypocone, metaconule, Carabelli's cusp, protostylid, metaconulid, enteconulid, and hypoconulid. All tooth crown traits were scored based on the ASUDAS scoring system. Descriptive statistics were used to calculate the absolute and relative frequencies. The Chi-square tests was used to determine significant differences in anterior and posterior tooth crown traits between males and females. Level of significance was set at 5%. Results: None of the traits showed sexual dimorphism. Moreover, the most common traits among the Mongoloid race were hypocone (94.4%) and shoveling (86.1%). Conclusion: Although none of the traits exhibited sexual dimorphism, most of them had a higher incidence among females than males. Nonetheless, further research including adequate samples and a similar number of females and males, is needed, especially for population studies.

Perception of attractiveness of missing maxillary lateral incisors replaced by canines

ABSTRACT Objective: The aim of this study was to evaluate the degree of perception of attractiveness of the smile among dentists, dental students, and lay persons in cases of agenesis of the maxillary lateral incisors replaced by canines for space closure. Methods: A smiling front view extraoral photograph of a 20-year-old woman was digitally altered simulating agenesis and its treatment, by means of: repositioning, reshaping or bleaching the canine, and gingival contour. A questionnaire was distributed to individuals of the three groups (n= 150), with a view to evaluating their degree of esthetic perception. An attractiveness scale was also used, with '0' representing unattractive and '10', very attractive. Results: In the comparative evaluation among all the photographs, the original image obtained the highest level of acceptance. Photograph 'i' (agenesis of both lateral incisors treated with reposition and reshaping of the canines) was ranked as the least attractive by the dentists, whereas the student and lay persons ranked photograph 'f' (agenesis of both lateral incisors treated with reposition of the canines, gingival contour, bleaching and reshaping) as the worst. Conclusion: The methods of treatment most accepted among the dentists and students were those that involved changes in the gingival contour, whereas among lay persons, they were those that involved only reshaping.

RESUMO Objetivo: o objetivo do presente estudo foi avaliar o grau de percepção da atratividade do sorriso por dentistas, estudantes de Odontologia e leigos, em casos de agenesia dos incisivos laterais superiores substituídos por caninos, para fechamento do espaço. Métodos: uma fotografia extrabucal frontal do sorriso de uma mulher com 20 anos de idade foi alterada simulando agenesia e seu tratamento por meio de: reposicionamento do canino, remodelação, clareamento ou contorno gengival. Um questionário foi distribuído aos indivíduos dos três grupos (n= 150), com o objetivo de avaliar o grau de percepção estética. Uma escala de atratividade também foi usada, com '0' representando pouco atraente e '10', muito atraente. Resultados: na avaliação comparativa entre as fotografias, a imagem original obteve o maior nível de aceitação. A fotografia "i" (agenesia de ambos os incisivos laterais tratada com reposição e remodelação dos caninos) foi classificada como a menos atraente pelos dentistas, enquanto os estudantes e os leigos classificaram a "f" (agenesia de ambos os incisivos laterais tratada com reposição dos caninos, contorno gengival, clareamento e remodelação) como a pior. Conclusão: os métodos de tratamento mais aceitos entre dentistas e estudantes foram aqueles que envolviam mudanças no contorno gengival, enquanto entre os leigos foram aqueles que envolviam apenas remodelação.

Aplicación de toxina botulínica tipo A para el manejo de la sonrisa gingival / Application of type-A botulinic toxin for the management of gummy smile

La toxina botulínica tipo A puede ser utilizada en diversas situaciones de interés odontológico, entre ellas, los trastornos temporo-mandibulares, hábitos parafuncionales, hipertrofia del músculo masetero, parálisis facial, asimetría de labios y, más recientemente, en los casos de hipermiotonía labial y sonrisa gingival. El objetivo de este trabajo es reportar el caso de un paciente con queja estética de sonrisa gingival. La aplicación de la toxina botulínica promovió la dehiscencia uniforme del labio superior y minimizó la molestia causada por la sonrisa gingival de forma rápida y poco invasiva, mostrando que esta puede convertirse en una alternativa terapéutica eficaz para el tratamiento de la sonrisa gingival, favoreciendo la estética facial y la autoestima del paciente.

Botulinum toxin type A could be used in various situations of dental interest including temporomandibular disorders, parafunctional habits, masseter muscle hypertrophy, facial paralysis, lip asymmetry and more recently in the cases of hyper myotonic lips and gummy smile. The aim of this paper is to report the case of a patient with complaint of gingival aesthetic smile. The application of botulinum toxin promoted the uniform dehiscence of the upper lip and minimized the discomfort caused by the gummy smile in a fast and little invasive way, showing that botulinum toxin can become an effective therapeutic alternative for the treatment of gummy smile, favoring facial aesthetics and patient self-esteem.

Proporciones del ancho/longitud de las coronas clínicas de los dientes anteriores del maxilar en una población Latino-Americana / Width/length ratios of clinical crowns of maxillary anterior teeth in a Latin-American cohort

Objetivo: Analizar las dimensiones de las coronas clínicas de los dientes anteriores del maxilar con respecto al ancho, longitud y proporción del ancho/longitud; y determinar si existe una correlación entre estos parámetros, así como con la altura facial en una población Latino-Americana. Material y métodos: Este estudio fue observacional de tipo transversal, se seleccionó una muestra de 94 estudiantes de ambos sexos entre 17 y 28 años de edad. Se evaluó en modelos confeccionadosde yeso el ancho, la longitud y la proporción entre ancho/longitud delincisivo central (IC), lateral (IL) y canino (CA) superior derecho, asícomo también se determinó clínicamente la altura facial utilizando un Vernier digital. Resultados: La longitud promedio de las coronas clínicas (en mm) de varones versus mujeres fue del IC: 10.36 versus 9.45; IL: 8.90 versus 8.24 y CA: 10.37 versus 9.43; mientras queel ancho promedio fue del IC: 8.44 versus 8.16; del IL: 7.00 versus 6.78 y del CA: 8.26 versus 8.00. La proporción promedio del ancho/longitud de las coronas clínicas de los varones versus mujeres fue del IC: 0.81 versus 0.86; IL: 0.78 versus 0.82 y CA: 0.80 versus 0.85. Se obtuvieron diferencias signifi cativas del ancho, longitud y la proporción del ancho/longitud de estas coronas por género (p < 0.05). Ademásse encontró una correlación positiva entre las dimensiones de estos dientes, mientras que se obtuvo una correlación relativa con la altura facial. Conclusión: Los resultados indican que en varones y mujeres la proporción del ancho / longitud promedio de las coronas clínicas de los dientes anterosuperiores es 0.82; además del ancho, la longitud de éstos es mayor en los varones y existe una correlación positiva entre las dimensiones dentarias, todo ello nos puede servir como pautas para el plan de tratamiento, procedimientos clínicos estéticos en odontología restauradora para nuestra población.

Objective: To analyze the dimensions of clinical crowns of maxillary anterior teeth in terms of width, length, and width/length ratio, and todetermine whether there is a correlation between these parameters and facial height in a Latin American cohort. Material and methods: Anobservational cross-sectional study was conducted, in which a sampleof 94 students of both sexes, aged between 17 and 28 years old, wasselected. Plaster models were used to measure the width, length, andwidth/length ratio of the central incisor (CI), lateral incisor (LI) andupper-right canine (CA); facial height was also measured using a digital Vernier caliper. Results: The average length of the clinical crowns(in mm) for males versus females was CI: 10.36 versus 9.45; LI: 8.90versus 8.24 and CA: 10.37 versus 9.43; the average width was CI: 8.44versus 8.16; LI: 7.00 versus 6.78 and CA: 8.26 versus 8.00. The averagewidth/length ratio of the clinical crowns of males versus females wasCI: 0.81 versus 0.86; LI: 0.78 versus 0.82 and CA: 0.80 versus 0.85.Signifi cant diff erences in the width, length, and width/length ratio ofthese crowns were found between the sexes (p < 0.05). Furthermore, apositive correlation was found between the dimensions of these teeth,and a relative correlation with facial height. Conclusion: The resultssuggest that, in both men and women, the average width/length ratioof the clinical crowns of upper anterior teeth is 0.82; Furthermore, thewidth and length of these teeth is greater in males and there is a positivecorrelation between the dental dimensions. Together these fi ndingscan serve as guidelines in planning the treatment and clinical aesthetic procedures used in restorative dentistry for our cohort.

Crown-to-root ratios in terms of length, surface area and volume: a pilot study of premolars / Relaciones de la corona y raíz dentaria en términos de longitud superficie y volumen: un estudio piloto de dientes premolares

The objective of this study was to construct three-dimensional (3D) images of premolars to measure the length, surface area and volume of crown and root and to analyze the mathematical relation among crown-to-root ratios in terms of length, surface area and volume. Twenty-five premolars were scanned using micro-computed tomography (micro CT) in vitro to build 3D models. The long axis and enamelo-cemental junction of each tooth were determined with the help of Geomagic Studio software, and the length, surface and volume of crown and root were measured. The crown-to-root ratios in terms of length, surface and volume were calculated and the relationship among length, surface area and volume of crown and root as well their ratios were analyzed using SPSS software. The interrelationship among crown length (x), surface area (y) and volume (z) could be expressed as z= -808.2 0+ 124.80x +3.35y -5.59x2-0.14xy+3.47y 2*10-4 (R2 = 0.99) and that of root length (x1), surface area (y1) and volume (z1), as z1= -207.50 +13.87x1+1.75y1 + 5.03x12*10-2-8.05x 1y1 *10-2+ 2.58*10-3y12 (R2 = 0.93) . The correlation among crown-to-root ratio in length(x2), crown-to-root ratio in surface area (y2) and crown-to-root ratio in volume (z2) could be expressed in z2= -4.48*10-2 -1.25x2*10-2+1.20y2 + 3.29x22-5.05x2y2 + 2.00y22 (R2 = 0.96). The length, surface area and volume of crown and root of premolars share a close relationship, while, a definite mathematical relation could be observed amongst their ratios. Crown to root ratio in terms of length, surface and volume, may provide a novel multi-criterion method for evaluating tooth function.

El objetivo de este estudio fue construir imágenes tridimensionales (3D) de los dientes premolares para medir la longitud, superficie y volumen de la corona y raíz, junto con analizar la relación matemática entre las proporciones de la corona a la raíz en términos de longitud, superficie y volumen. Veinticinco premolares fueron escaneados mediante microtomografía computadorizada (microTC) in vitro para construir modelos en 3D. Con el software Geomagic se determinaron el eje y la unión amelo-cementaria de cada diente, y se midieron la longitud, superficie y volumen de la corona y la raíz de los dientes premolares. Con el programa SPSS se calcularon y analizaron las proporciones de la corona a la raíz en términos de longitud, superficie y volumen y la relación entre la longitud, superficie y volumen de la corona y de la raíz. La interrelación entre la longitud de la corona (x), superficie (y) y el volumen (z) puede ser expresado como z= -808,2 0+ 124,80x + 3,35y -5,59x2-0,14xy + 3.47y2*10-4 (R2= 0,99) y la de longitud de la raíz (x1), área de superficie (y1) y el volumen (z1), como z1= -207,50 + 13.87x1 + 1.75y1 + 5.03x12 * 10-2-8.05x1y1 * 10-2 + 2,58 * 10-3y12 (R2= 0,93). La correlación entre la relación de corona a raíz en longitud (x2), la relación corona a raíz en superficie (y2) y la relación corona a raíz en volumen (Z2) podría expresarse en z2 = -4,48 * 10-2 * 10-2 -1.25x2 + 1.20y2 3.29x22-5.05x2y2 + 2.00y22 (R2= 0,96). La longitud, superficie y volumen de la corona y la raíz de los dientes premolares comparten una estrecha relación, mientras que, una relación matemática definida se pudo observar entre sus proporciones. La relación entre la corona y raíz en términos de longitud, superficie y volumen, puede proporcionar un nuevo método multi-criterio para evaluar la función de los dientes.

Periodontal and dental effects of surgically assisted rapid maxillary expansion, assessed by using digital study models

OBJECTIVE: The present study assessed the maxillary dental arch changes produced by surgically assisted rapid maxillary expansion (SARME). METHODS: Dental casts from 18 patients (mean age of 23.3 years) were obtained at treatment onset (T1), three months after SARME (T2) and 6 months after expansion (T3). The casts were scanned in a 3D scanner (D-250, 3Shape, Copenhagen, Denmark). Maxillary dental arch width, dental crown tipping and height were measured and assessed by ANOVA and Tukey's test. RESULTS: Increased transversal widths from T1 and T2 and the maintenance of these values from T2 and T3 were observed. Buccal teeth tipping also showed statistically significant differences, with an increase in all teeth from T1 to T2 and a decrease from T2 to T3. No statistically significant difference was found for dental crown height, except for left first and second molars, although clinically irrelevant. CONCLUSION: SARME proved to be an effective and stable procedure, with minimum periodontal hazards. .

OBJETIVOS: o presente estudo teve o objetivo de avaliar as alterações dentárias e periodontais decorrentes da Expansão Rápida da Maxila Assistida Cirurgicamente (ERMAC). MÉTODOS: foram obtidos os modelos de gesso de 18 pacientes (média de idade de 23,3 anos), ao início (T1), 3 meses após a ERMAC (T2) e 6 meses após a expansão (T3). Os modelos foram digitalizados (Scanner 3D 3Shape D-250) e mensuraram-se as distâncias transversais, bem como a inclinação e a altura da coroa clínica dos dentes posteriores. Para análise dos resultados, aplicou-se a análise de Variância e o teste de Tukey. RESULTADOS: nas distâncias transversais, observou-se um aumento de T1 para T2 e uma manutenção de T2 para T3. As inclinações dentárias demonstraram diferenças estatisticamente significativas em alguns dentes; porém, numericamente tenderam a um aumento de T1 para T2 e a uma diminuição de T2 para T3. Não se observou diferença estatisticamente significativa na altura da coroa clínica, exceto nos primeiros e segundos molares do lado esquerdo, porém, clinicamente irrelevante. CONCLUSÕES: a ERMAC demonstrou ser um procedimento efetivo e estável, com mínima repercussão periodontal. .

Influence of polyurethane resin dies on the fit and adaptation of full veneer crowns.

Context: Polyurethane resin is a possible alternative to type IV dental stone for fabrication of indirect restorations however its dimensional accuracy is questionable. Aim: The aim was to investigate the dimensional accuracy of silica filled polyurethane resin die material by evaluating the marginal fit and adaptation of indirect gold castings. Settings and Design: Experimental, in vitro study. Materials and Methods: Totally 40 copper plated replicas of a nickel chrome master die analogous to a veneer gold crown preparation were made and impressions recorded using polyvinylsiloxane material. Twenty impressions were poured in type IV dental stone (control group (Vel‑mix, Kerr, UK) and the remaining (n = 20) in silica filled polyurethane die material (test group) (Alpha Die MF, CA, USA). Gold castings were fabricated for each die using standardized techniques. The castings were seated on their respective copper plated dies, embedded in resin and sectioned. The specimens were analyzed by measuring marginal opening and the area beneath the casting at a ×63 magnification and using image analysis software. Statistical Analysis Used: Data were analyzed using a Student’s t‑test. Results: No significant difference was observed between the experimental groups (P > 0.05). The mean marginal opening for type IV, dental stone and polyurethane resin, was 57 ± 22.6 μm and 63.47 ± 27.1 μm, respectively. Stone displayed a smaller area beneath the casting (31581 ± 16297 μm2) as compared to polyurethane resin (35003 ± 23039 μm2). Conclusions: The fit and adaptation of indirect gold castings made on polyurethane and type IV dental stone dies were comparable.

Measurement accuracy and reliability of tooth length on conventional and CBCT reconstructed panoramic radiographs

INTRODUCTION: This in vivo study assessed accuracy and reliability of tooth length measurements obtained from conventional panoramic radiographs and CBCT panoramic reconstructions to that of a digital caliper (gold standard). METHODS: The sample consisted of subjects who had CBCT and conventional panoramic radiographic imaging and who required maxillary premolar extraction for routine orthodontic treatment. A total of 48 teeth extracted from 26 subjects were measured directly with digital calipers. Radiographic images were scanned and digitally measured in Dolphin 3D software. Accuracy of tooth length measurements made by CBCT panoramic reconstructions, conventional panoramic radiographs and digital caliper (gold standard) were compared to each other by repeated measures one-way ANOVA with Bonferroni correction and by single measures intraclass correlation coefficient. RESULTS: Repeated root length measures with digital calipers, panoramic radiographs and CBCT constructed panoramic-like images were all individually highly reliable. Compared to the caliper (gold standard), tooth measurements obtained from conventional panoramic radiographs were on average 6.3 mm (SD = 2.0 mm) longer, while tooth measurements from CBCT panoramic reconstructions were an average of 1.7 mm (SD = 1.2 mm) shorter. CONCLUSIONS: In comparison to actual tooth lengths, conventional panoramic radiographs were relatively inaccurate, overestimating the lengths by 29%, while CBCT panoramic reconstructions underestimated the lengths by 4%. .

INTRODUÇÃO: este estudo in vivo avaliou a precisão e a confiabilidade de medições do comprimento dentário realizadas em radiografias panorâmicas convencionais e em reconstruções panorâmicas de tomografias computadorizadas de feixe cônico (TCFC), comparando-as com medições feitas com um paquímetro digital, consideradas o padrão-ouro. MÉTODOS: a amostra incluiu indivíduos que já tivessem realizado tanto exames imaginológicos de TCFC quanto radiografias panorâmicas, e cujo tratamento ortodôntico exigisse a extração de pré-molar superior. No total, 48 dentes extraídos, de 26 pacientes, foram mensurados diretamente com paquímetros digitais. As radiografias foram escaneadas e digitalmente avaliadas com a ajuda do software Dolphin 3D. Por meio da análise de variância simples com correção de Bonferroni e Coeficiente de Correlação Intraclasse simples, comparou-se a precisão das medições de comprimento dentário realizadas em reconstruções panorâmicas de TCFC, em radiografias panorâmicas convencionais e com paquímetro digital. RESULTADOS: medições repetidas de comprimento dentário feitas com o paquímetro digital, radiografias panorâmicas e reconstruções panorâmicas de TCFC foram todas consideradas, individualmente, altamente confiáveis. Em comparação ao paquímetro, as medidas obtidas por meio de radiografias panorâmicas convencionais foram, em média, 6,3 ± 2,0mm mais longas, enquanto as medidas obtidas por meio das reconstruções panorâmicas de TCFC foram, em média, 1,7 ± 1,2mm mais curtas. CONCLUSÕES: em comparação com o real comprimento dentário, as radiografias panorâmicas convencionais foram relativamente ...

Evaluation of changes in clinical crown length of lower anterior teeth after treatment with Frankel-2's appliance.

Purpose: The aim of this study was to test the null hypothesis that there is no change in the lower anterior teeth's crown size when measured just after the treatment with Frankel-2's orthopedic appliance and in a long-term posttreatment follow-up. Materials and Methods: The sample was composed of 34 plaster models belonging to 9 male and 8 female individuals, treated at the College of Health, Methodist University of São Paulo, São Bernardo do Campo, São Paulo, Brazil, with mean age of 12 years and 6 months (standard deviation [SD] =7 months) at T1 (end of the treatment with Frankel-2's function regulator), and 19 years and 8 months (SD = 7 months) at T2 (7.11 years after the end of the treatment). Results: The distance from the incisal edge to the most concave portion of the gingival margin of the lower incisors and canines was measured using a digital caliper. Data analysis was carried out by means of Student's t-test and paired-t test. Among the lower anterior teeth, the teeth 31, 33, 42 and 43 showed a statistically significant increase in their crown length, whereas the teeth 32 and 41 showed no changes. Conclusion: It can be concluded that there is a tendency to increase the clinical crown of lower anterior teeth throughout the years after the mandibular advancement treatment by using functional devices, rejecting the null hypotheisis.

Evaluation of a photographic method to measure dental angulation

Objective: To analyze the reliability and reproducibility of a simplified method for analysis of dental angulation using digital photos of plaster dental casts. Methods: Digital and standardized photographs of plaster casts were performed and posteriorly imported to an angle reading graphic program in order to have measurements obtained. Such procedures were repeated to evaluate the random error and to analyze reproducibility through intraclass correlation. The sample consisted of 12 individuals (six male and six female) with full permanent dentition orthodontically untreated. The analyses were bilaterally carried out, and generated 24 measurements. Results: The random error showed variation of 0.77 to 2.55 degrees for teeth angulation. The statistical analysis revealed that the method presents excellent reproducibility (p < 0.0001) for all teeth, except for the upper premolars. In spite of that, it is still considered statistically significant (p < 0.001). Conclusion: The proposed method presents enough reliability that justifies its use in the development of scientific research as well as in clinical practice. .

Objetivo: analisar a confiabilidade e reprodutibilidade de um método simplificado para análise da angulação dentária que faz uso de fotografias digitalizadas de modelos de gesso. Métodos: foram realizadas fotografias digitalizadas e padronizadas de modelos de gesso, posteriormente transportadas para um programa gráfico de leitura de ângulos, para a obtenção das medidas. Tais procedimentos foram repetidos para avaliação do erro do método casual e para a análise da reprodutibilidade por meio da Correlação Intraclasse. A amostra constituiu-se de 12 indivíduos com dentição permanente completa e não tratados ortodonticamente, sendo seis do sexo masculino e seis do feminino. As análises foram feitas bilateralmente, gerando 24 medidas. Resultados: o erro casual mostrou uma variação de 0,77 a 2,55º para a angulação dos dentes. A análise estatística revelou que o método apresenta uma excelente reprodutibilidade (r = 0,65 - 0,91; p < 0,0001) para todos os dentes, exceto para os pré-molares superiores, mas ainda assim estatisticamente significativa (p < 0,001). Conclusão: o método proposto apresenta confiabilidade suficiente para justificar seu uso no desenvolvimento de pesquisas científicas, bem como na prática clínica. .

Frequency and variability of dental morphology in deciduous and permanent dentition of a Nasa indigenous group in the municipality of Morales, Cauca, Colombia / Frecuencia y variabilidad de la morfología dental en dentición temporal y permanente de un grupo de indígenas Nasa del municipio de Morales (Cauca, Colombia)

Abstract Objectives: To determine the frequency, variability, sexual dimorphism and bilateral symmetry of fourteen dental crown traits in the deciduous and permanent dentition of 60 dental models (35 women and 25 men) obtained from a native, indigenous group of Nasa school children of the Musse Ukue group in the municipality of Morales, Department of Cauca, Colombia. Methods: This is a quantitative, descriptive, cross-sectional study that characterizes dental morphology by means of the systems for temporary dentition from Dahlberg (winging), and ASUDAS (crowding, reduction of hypocone, metaconule and cusp 6), Hanihara (central and lateral incisors in shovel-shape and cusp 7), Sciulli (double bit, layered fold protostylid, cusp pattern and cusp number) and Grine (Carabelli trait); and in permanent dentition from ASUDAS (Winging, crowding, central and lateral incisors in shovel-shape and double shovel-shape, Carabelli trait, hypocone reduction, metaconule, cusp pattern, cusp number, layered fold protostylid, cusp 6 and cusp 7). Results: The most frequent dental crown features were the shovel-shaped form, grooved and fossa forms of the Carabelli trait, metaconule, cusp pattern Y6, layered fold, protostylid (point P) and cusp 6. Sexual dimorphism was not observed and there was bilateral symmetry in the expression of these features. Conclusions: The sample studied presented a great affinity with ethnic groups belonging to the Mongoloid Dental Complex due to the frequency (expression) and variability (gradation) of the tooth crown traits, upper incisors, the Carabelli trait, the protostylid, cusp 6 and cusp 7. The influence of the Caucasoide Dental Complex associated with ethno-historical processes cannot be ruled out.

Resumen Objetivos: Determinar la frecuencia, la variabilidad, el dimorfismo sexual y la simetría bilateral de 14 Rasgos Morfológicos Dentales Coronales (RMDC) en dentición temporal y permanente de 60 modelos (35 mujeres y 25 hombres) obtenidos de un grupo de indígenas escolares Nasa del cabildo Musse Ukue del municipio de Morales, departamento del Cauca. Métodos: Estudio descriptivo transversal cuantitativo que caracteriza la morfología dental mediante los sistemas en dentición temporal Dahlberg (winging), Asudas (crowding, reducción de hipocono, metacónulo y cúspide 6), Hanihara (incisivos centrales y laterales en pala y cúspide 7), Sciulli (doble pala, protostílido, pliegue acodado, patrón cuspídeo y número de cúspides) y Grine (cúspide de Carabelli); y en dentición permanente Asudas (Winging, crowding, incisivos centrales y laterales en pala, doble pala, cúspide de Carabelli, reducción del hipocono, metacónulo, patrón cuspídeo, número de cúspides, pliegue acodado, protostílido, cúspide 6 y cúspide 7). Resultados: Los RMDC más frecuentes fueron la forma de pala, formas surco y fosa de la cúspide de Carabelli, metacónulo, patrón cuspídeo Y6, pliegue acodado, protostílido (punto P) y cúspide 6. No se observó dimorfismo sexual y hubo simetría bilateral en la expresión de los rasgos. Conclusiones: La muestra estudiada presenta una alta afinidad con grupos étnicos pertenecientes al Complejo Dental Mongoloide debido a la frecuencia (expresión) y variabilidad (gradación) de los RMDC, incisivos en pala, la cúspide Carabelli, el Protostílido, la cúspide 6 y la cúspide 7; sin embargo, no se puede descartar influencia del Complejo Dental Caucasoide asociado con procesos etno-históricos.

Applicability of Moyers analysis in mixed dentition: A systematic review

INTRODUCTION: Moyers analysis is widely used for analyzing mixed dentition, however, the accuracy of its theoretical probability tables has been recently questioned. Taking into consideration the fact the mixed dentition analysis is of paramount importance to precisely determine the space needed for alignment of canines and premolars, this research aimed at objectively assessing in the literature such an important step for orthodontic diagnosis. METHODS: A computerized search involving articles published on PubMed and Lilacs between 1990 and September, 2011 was conducted in accordance with the method described in the Cochrane 5.1.0 handbook. RESULTS: The research resulted in a sample composed of 629 articles. The inclusion criteria were: Articles using the Moyers analysis with a sample greater or equal to 40 patients. Conversely, the exclusion criteria were: Dental casts of patients with syndromes or oral cleft, researches conducted with a literature review, only, or clinical case reports and researches conducted before 1990. For this systematic review, 19 articles were selected. CONCLUSION: Based on the literature available, we can conclude that the Moyers mixed dentition analysis must be carefully used, since the majority of the articles analyzed showed that the probability of 75% was not as accurate as expected, leading to the need of adapting the probability levels depending on the study population.

INTRODUÇÃO: a análise de Moyers é amplamente adotada para a análise da dentição mista, porém, recentemente, a acurácia das suas tabelas de probabilidade está sendo questionada. OBJETIVO: sabendo-se da importância da análise da dentição mista, na determinação mais precisa possível do espaço necessário para o alinhamento de caninos e pré-molares, o objetivo dessa pesquisa foi avaliar de forma objetiva na literatura este importante passo do diagnóstico ortodôntico. MÉTODOS: foi realizado um levantamento computadorizado de artigos publicados entre os anos de 1990 a setembro de 2011 nas bases de dados PubMed e LILACS, segundo o método descrito no manual Cochrane 5.1.0. RESULTADOS: a estratégia de busca resultou em 629 artigos. Para ser selecionado, o artigo deveria utilizar a análise de Moyers e ter uma amostra superior ou igual a 40 pacientes. Os critérios de exclusão foram: modelos de gesso de pacientes com algum tipo de síndrome ou fissurados, pesquisas cuja proposta era apenas uma revisão da literatura ou apenas relato de um caso clínico, e pesquisas anteriores ao ano de 1990. Para essa revisão sistemática, 19 artigos foram selecionados. CONCLUSÕES: com base na literatura disponível, pode-se concluir que a utilização da análise de Moyers na análise da dentição mista deve ser utilizada de maneira cautelosa, pois, na maioria dos artigos avaliados, 75% não apresentou a acurácia desejada, necessitando de adaptações nos níveis de probabilidade, dependendo da população em estudo.

Finishing procedures in Orthodontics: dental dimensions and proportions (microesthetics)

OBJECTIVE: The objective of the present article is to describe procedures that can be performed to achieve excellence in orthodontic treatment finishing. The content is limited to microesthetics, which comprises the concept of ideal dental dimensions and proportions (white esthetics) and its correlation with the periodontium (pink esthetics). Standards of normality are described both in their real dimensions (dental height and width), and in those effectively perceived by the observer, the virtual dimensions. METHODS: The best scientific evidence was sought in the literature to support the clinical procedures that must guide the professional to obtain maximum esthetic quality on their treatments. Therefore, it is necessary to investigate what the other specialties in Dentistry expect from Orthodontics and, specially, what they have to offer. Clinical cases will be used to illustrate the dental movement that might maximize treatment outcome and to confront the ideal standards with the current state of the art. CONCLUSION: Treatment quality is directly related to the amount of procedures implemented by the orthodontist, associated with concepts and resources from Periodontics and Dental Prosthesis. Microesthetics cannot be seen in isolation, but rather as the key to establish a pleasant smile (miniesthetics) in addition to a harmonious face (macroesthetics) and a human being with high self-esteem (hyper-esthetics).

OBJETIVO: o objetivo do presente artigo é descrever procedimentos que podem ser realizados para alcançar a excelência na finalização do tratamento ortodôntico. Delimita-se o assunto à micro-estética, que abrange o conceito das dimensões e proporções dentárias ideais (estética branca) e sua correlação com o periodonto (estética vermelha). Padrões de normalidade são descritos tanto em suas dimensões reais (altura e largura dentária), como naquelas efetivamente percebidas pelo observador, as dimensões virtuais. MÉTODOS: buscou-se na literatura a melhor evidência científica para embasar os procedimentos clínicos que devem nortear o profissional para obter a máxima qualidade estética nos tratamentos. E, para tanto, há necessidade de investigar o que as demais especialidades da Odontologia esperam da Ortodontia e, principalmente, o que têm a oferecer. Casos clínicos serão utilizados para ilustrar a movimentação dentária que pode maximizar o resultado final do tratamento, e para confrontar com os padrões ideais para o estado da arte atual. CONCLUSÃO: conclui-se que a qualidade do tratamento está diretamente relacionada à soma de procedimentos implementados pelo ortodontista, associados a conceitos e recursos da Periodontia e Prótese Dentária. A micro-estética não pode ser vista de forma isolada, mas sim como parte fundamental para se estabelecer um sorriso agradável (mini-estética), uma face harmoniosa (macro-estética) e um ser humano com autoestima elevada (hiper-estética).

Evaluation of the vertical alterations of the upper second molars after the alignment and leveling phase using the MBT technique

OBJECTIVE: This study aimed at comparing the distocervical angulations of upper second molars crowns of groups with normal occlusion and with Angle Class I and II malocclusions. Additionally, it aimed to analyze the changes occurring after alignment and leveling performed with MBT technique. METHODS: The sample of normal occlusions comprised 32 lateral teleradiographs, while the sample of malocclusions comprised 38 initial and post-leveling lateral teleradiographs. RESULTS: The results did not show statistically significant differences between morphological characteristics of the normal occlusion group and the malocclusion group. On the other hand, after alignment and leveling, statistically significant reduction was observed in distocervical inclinations with extrusion of the distal portion of upper second molars.

OBJETIVO: a proposta do presente trabalho foi comparar as angulações distocervicais das coroas dos segundos molares superiores de um grupo com oclusão normal e outro composto de más oclusões de Classes I e II de Angle, e analisar as modificações ocorridas após o alinhamento e nivelamento com a técnica MBT. MÉTODOS: a amostra de oclusão normal foi composta por 32 telerradiografias laterais; e a amostra de má oclusão constituiu-se de 38 telerradiografias laterais iniciais e pós-nivelamento. RESULTADOS: os resultados não mostraram diferença estatisticamente significativa entre as características morfológicas dos grupos com oclusão normal e com má oclusão; porém, após o alinhamento e nivelamento, observamos redução estatisticamente significativa nas inclinações distocervicais, com extrusão da porção distal dos segundos molares superiores.

Comparison of mesiodistal tooth widths in Caucasian, African and Japanese individuals with Brazilian ancestry and normal occlusion

OBJECTIVE: To observe the presence of sexual dimorphism and compare the mesiodistal width of the teeth in Caucasian, African and Japanese individuals with Brazilian ancestry not orthodontically treated and with normal occlusion. METHODS: One hundred pairs of dental casts were used. It was measured, from first molar to first molar in both arches, the teeth's mesiodistal widths, using a digital caliper. For the statistical analysis of results Kolmogorov-Smirnov, t test, ANOVA and Tukey's test (p < 0.05) were used. RESULTS: Sexual dimorphism occurred on the three evaluated groups, and the highest mesiodistal widths were found in males. There was statistically significant difference between racial groups in all evaluated teeth in males. However, in females, this same difference was found only on upper lateral incisor and first molar; and lower lateral incisor, canine, first premolar and first molar. CONCLUSION: Most of mesiodistal measures present particular characteristics in relation to gender, with higher values for males, and to race, with a tendency for African to present greater mesiodistal distance of the teeth, followed by Japanese and Caucasians, respectively, important for the correct diagnosis and orthodontic planning.

OBJETIVO: observar a presença de dimorfismo sexual e comparar a largura mesiodistal dos dentes em indivíduos brasileiros leucodermas, melanodermas e xantodermas não tratados ortodonticamente e com oclusão normal. MÉTODOS: foram utilizados 100 pares de modelos de gesso ortodônticos. As larguras mesiodistais dos dentes foram medidas de primeiro molar a primeiro molar, em ambas as arcadas, utilizando um paquímetro digital. Para a análise estatística dos resultados foi utilizado o teste de Kolmogorov-Smirnov, o teste t, a Análise de Variância (ANOVA) a um critério e o teste de Tukey (p < 0,05). RESULTADOS: ocorreu dimorfismo sexual nos três grupos avaliados, sendo que as maiores larguras mesiodistais foram encontradas no sexo masculino. Houve diferença estatisticamente significativa entre os grupos raciais em todos os dentes avaliados para o sexo masculino. Já no sexo feminino, essa mesma diferença foi encontrada apenas nos dentes incisivo lateral e primeiro molar superior, e incisivo lateral, canino, primeiro pré-molar e primeiro molar inferior. CONCLUSÃO: a maioria das medidas dentárias mesiodistais apresentam características próprias em relação ao sexo, com valores maiores para o sexo masculino; e em relação à raça, com uma tendência dos melanodermas apresentarem maior distância mesiodistal dos dentes, seguidos pelos xantodermas e leucodermas, respectivamente. O conhecimento dessas diferenças é importante para o correto diagnóstico e planejamento ortodôntico.

Perception of smile esthetics among Indian dental professionals and laypersons.

Introduction : Patients' perceptions and expectations regarding their appearance play a significant role in treatment planning. The purpose of this study was to compare the perceptions of orthodontists, general dentists, and laypersons regarding smile esthetics after symmetrical and asymmetrical alterations in anterior teeth and their supporting tissues. Materials and Methods: Alterations were made in the crown length, crown width, midline diastema, and gingiva-to-lip relationship of the maxillary anterior teeth in the close-up photograph of a woman's smile. The attractiveness of the smile in the original image and in each of the modified images were assessed by orthodontists (n=40), dentists (n=40), and laypersons (n=40) and scored using a visual analog scale (VAS). The mean VAS scores were calculated for each photograph. ANOVA was used for comparisons between photographs and between groups. To determine threshold levels at which each group discriminated between esthetic and less esthetic dental features were determined by one-way ANOVA (F-test) followed by Newman-Keul's range test. Results : Orthodontists were found to be more critical when evaluating smile images compared to general dentists and laypersons. Symmetrical or asymmetrical alterations in the mesio-distal width of the lateral incisor of up to 2 mm was not perceived as unesthetic by general dentists and laypersons. Conclusion: Laypersons are more accepting of minor variations in anterior tooth size and alignment than orthodontists.

Estética y ortodoncia / Esthetics and orthodontics

En este artículo se realiza un análisis de estética facial y de los elementos que conforman la sonrisa. Esto debe ser parte integral de un estudio en ortodoncia.